Instructions / Assembly

STEP 4:

1. Align the top cap (E) with your top snap making sure one end is flush.

Starting at one end, squeeze the top cap and top snap (D) together until

it pops in place. Continue snapping down the top cap until reaching the

end of your railing.

2. Slide the top post mounts (F) and bottom post mounts (G) over the

ends of your railing (4 mounts total).

3. Place assembled EZ Handrail section between posts. If the handrail

section need to be shortened, CUT EQUAL LENGTHS FROM BOTH ENDS

OF THE RAILING. Example: If the railing is 3” too long, cut 1 1/2” from

each end.