Full Product Manual

0
Fig. 9
14
Minimum Installation Clearances
Mobile Home Installation
Installation must conform to Standard for Mobile Homes, ANSI A119.1 and National Mobile home
Construction and Safety Standards Act of 1974 (PL93-383).
The appliance must be attached to the floor according to ADA Compliance given below.
When installed in alcove: Sides, Rear, Top = 0” (0cm)
When installed in closet: Sides, Rear, Top = 0” (0cm), Front = 1” (2.54cm)
Consideration must be given to provide adequate clearance for installation and service.