Instructions / Assembly
Contact Schön at (800) 880-8164 or visit www.schonsimplymodern.com. Copyright ©2015, World Imports Decorative Plumbing. All rights reserved.
PAGE 3
Esley Wall Hung Vanity
Installation Instructions
1: PREPARING THE WALL
1.
2.
3.
4.
2: HANGING THE MIRROR
1.
2.
A
Place the mirror (A) against the wall and determine your desired hanging
location. Using a pencil, mark two locations on the wall that match up with
the mirror’s (A) pre-attached mounting hooks.
Ensure the marks are horizontally straight by using a level.
Use a hammer to gently punch the anchor (D) halfway into the wall at each
marked location. Finish screwing in the anchor (D) with the screwdriver.
Using the screwdriver, insert the screws (E) into the anchors (D), leaving
approximately 1/8 in. of the screw revealed.
Hold the mirror (A) in place against the wall and line up the mounting hooks
with the screws (C).
Loop the mounting hooks over the scews (C) to hang the mirror (A).
X
X
D
E
C
3: HANGING THE WALL BRACKET
1.
2.
3.
4.
B
Place the mounting bracket (C) against the wall, alongside the mirror (A).
Using a pencil, mark two locations on the wall that match up with the
pre-drilled holes in the mounting bracket (C).
Ensure the marks are horizontally straight by using a level.
Use a hammer to gently punch the anchor (D) halfway into the wall at each
marked location. Finish screwing in the anchor (D) with the screwdriver.
Using the screwdriver, insert the screws (E) through the mounting bracket (C)
and into the anchors (D).
4: HANGING THE SHELF
X
X
D
C
E
A
Lift the shelf (B) above the bracket (C) and place it against the wall.
Slide the shelf (B) down the wall, hooking it onto the bracket (C).
1.
2.
C