Installation Guide

INSTALLATION GUIDE

MODELS:

EWP-1051 / EWP-1052 / EWP-1053

For customer service please call us at 1-888-743-5766

Ofce Hours: 8:00 a.m. – 5:00 p.m. PST Monday-Friday

Questions?



FOR MORE INFORMATION PLEASE VISIT: WWW.EURILIGHTING.COM

Wallmount

PLEASE REVIEW THE INSTRUCTIONS AND WARNINGS LISTED BELOW PRIOR TO PROPER INSTALLATION

WARNINGS CAUTIONS

• Risk of electric shock – disconnect power at source before installation.

• Properly ground electrical enclosure.

• Risk of fire - follow all NEC and Local codes.

• Use only UL or IEC approved wire for input/output connections.

•Professional installation required.

• Do not look directly at the operating LED lamp.

• Do not touch this product with wet hands.

• Do not disassemble, repair or alter lamp.

• Suitable for wet locations.

• The luminaires should be grounded.

• To prevent early lamp failure: Lamp should only be installed in

operating environments ranging between -20° C and +50° C .

• This Device is not intended for use with emergency exits or

emergency lights.

INSTALLATION INSTRUCTIONS

Before assembly, installation or operation turn power off prior to starting installation.

Loosen two outer screws. Rotate lamp head counter clock wise. Remove two inner screws and open access cover.

Connect the Live, Ground and Neutral wires from the

xture to corresponding wires on the junction box. All

wire connections should be secured with wirecaps.

Mount wall light to the junction box. Once in place use

a screwdriver to secure mounting screws.

Close access cover, adjust lamp head to desired angle,

tighten outer scews and turn power on.

LED Wall Pack

outer screws

lamp head

access cover

LED Wall PackSeries

Outdoor Class