Use and Care Manual

Operation

NOTE: Do not restrict or obstruct the airﬂow from the air outlet.

NOTE: After removing the water tank, do not touch any

internal parts of the unit; doing so may cause damage.

NOTE: The dehumidiﬁer will not operate unless the water

tank is inserted securely.

USING THE DEHUMIDIFIER

1. To start operation, press the power button to the ON position (“-”). A green LED light on the front panel will

illuminate.

2. To stop operation, press the power button to the OFF position (“o”).

3. When ﬁrst using the dehumidiﬁer, operate the unit continuously for 24 hours.

4. If the unit has been switched off and needs to be switched on again quickly, allow approximately three

minutes before restarting.

USING THE WATER TANK

□ Pull out the rubber plug (1) and dispose of the

water.

□ Secure the rubber stopper into the water tank (H),

and reinstall the tank into its correct position.

□ Slowly pull out the water tank (H). Grip the left

and right handles securely, and carefully pull the

water tank out straight to avoid water spillage.

3 4

WATER TANK FULL INDICATOR

WATER DISPOSAL REINSTALLATION

WATER TANK REMOVAL

□ When the water tank is full, the dehumidiﬁer

will automatically stop operation. A red LED

light (A) below the “ ” will ﬂash.