Performance

Upgrade from Version 2.13 and Earlier:
Open the EVOLUTION controller. If backup battery is present,
remove it.
Insert USB drive into controller USB slot.
Remove power from the controller.
• Unplug AC (preferred) OR
• Remove ribbon cable
Controller will automatically recognize USB
drive and upgrade the controller.
Cycle power when prompted.
Remove power from the controller... ...return power to the controller.
Firmware le is updated.
A status bar will indicate progress.
Controller resets and is updated! Go to
ADVANCED-->FIRMWARE-->VERSION
and conrm the rmware has been updated
to 3.50 and bootload version 3.01.
e update is complete.
Remove USB drive if desired.
1 2 3
4
6
9 10 11
12
5
7 8
At the same time:
Hold nger on DOWN button
AND...
...return power to the controller.
• Plug AC power back in OR
• Reattach ribbon cable