Manual

25
Step 2 – Use the Up
or Down arrows to select INCHES or METERS. Press SELECT .
Set Volume Unit (Starting Version 2.13)
Step 1 – While in the PREFERENCES menu, use the Up or Down arrows to navigate to VOLUME UNIT.
Press SELECT .
Step 2 – Use the Up or Down arrows to select GPM (Gallons/Minute) or LPM (Liters/Minute). Press SELECT .
Home Screen Messages
A
Title Bar
HOME
e battery icon indicates that the controller’s VAC power is o and
HOME
01:09PM
WED
01/08
NEXT START 06:00AM
ALERT: PRESS HELP
B
C
A
the timer is running under battery power.
Note: e 9-VDC battery is used to allow programming, but
will not activate any zones when the VAC power supply is o.
B
Main Display
01:09PM
TUES
01/08
Displays the current time, day of the week and date.
SCHEDULE A/B/C OR AUX
Indicates which schedule (A, B or C) or auxiliary is associated with the displayed status. If only Schedule
A is active, EVOLUTION
®
will not display the Schedule “A”, “B” and “C” or AUX. If an is displayed
to the left of the schedule name, then additional schedules are active and can be viewed by pressing the
Down arrow.
NEXT START 06:00AM
Note: e scroll down arrow indicates that additional information are available.
Use the Down arrow to reveal the additional message(s).
SCHEDULE A GROW IN
Indicates the displayed schedule is set as Grow In. e Grow In option is set in the Schedule Details
under the Advanced menu.
NOT WATERING TODAY
Indicates that the displayed schedule will not water that day.
NOT ACTIVE TODAY
e displayed auxiliary schedule (Aux) will not activate that day.
ZONE 1 00:05
Indicates that Zone 1 is active with a 5 minute remaining runtime. Pressing the Right arrow will
deactivate the running zone and activate the next zone (if additional zones are scheduled) in the schedule
regardless of the remaining runtime.
WATERING COMPLETE
e displayed schedule completed its watering cycle.
SCHEDULE COMPLETE
e displayed auxiliary schedule (Aux) completed its cycle.
NEXT START 06:00AM
Indicates the next start time of the displayed watering or auxiliary (Aux) schedule.
DELAY 00:05
Indicates that the controller is performing a zone delay before the next zone in the schedule is activated.
e zone delay is set in the Schedule Details under the Advanced menu.
SOAK 00:05
Indicates that the active zone is performing a soak delay before continuing operation. e soak delay is
set in the Zone Details under the Advanced menu.
RAIN DELAY
Indicates that the rain sensor is activated and the schedule is delayed until the rain sensor dries up.
RAIN DELAY 02 DAYS
If Dryout Days is set, the controller will indicate Rain Delay until the number of Dryout Days are
completed. Pressing the Right arrow will deactivate the Dryout Days, and the Schedule(s) will
continue normal operation.
FREEZE HOLD
Indicates that the measured temperature from the rain/freeze sensor or weather station is the same of less
than the set value in the FREEZE OFF menu parameter.
ET HOLD
Indicates that all scheduled watering are placed on hold due to weather condition measured by the
weather station. Scheduled watering will resume once the weather condition returns to conditions that
permits watering.
C
Message Bar
ALERT: PRESS HELP
Indicates that the controller detected a condition that needs user attention. Check the alert messages in
the Alerts menu under the Help/Setup function. For a list of the Alert messages and description, please
refer to the Alerts section.
WATER OFF 04 DAYS
Indicates that scheduled watering has been suspended for the indicated days. Watering can be turned o
from 1–14 days, Remains O or will operate at the next scheduled start.
SYSTEM OK
Indicates that the system is functioning as expected.