Manual

22
Factory Reset
Select this function to reset the controller to the factory default parameters. Schedule B, C and Auxiliary will be disabled and all of their
parameters will be cleared or set to OFF. Schedule A will be set with a WEEKDAY schedule with all 7 days active. It will have one start time
set to OFF and all zone runtimes set to OFF.
FACTORY RESET
RESET TO FACTORY
DEFAULTS? YES
Help/Setup
Alerts
e EVOLUTION® controller always checks the system for proper function and it will provide feedback if it detects any system
abnormality. e Alerts menu allows you to view and clear detected system faults. e date and time of the alert is noted.
Alert Listings
Freeze Hold - EVOLUTION
® detected temperatures below the set FREEZE OFF temperature when the controller tried to irrigate.
(Only available if Rain/Freeze or Weather sensor is connected).
Short - EVOLUTION® detected a short in the zone.
Overcurrent - EVOLUTION® detected an over current in the zone. Over current occurs when a terminal or combinations of terminals
exceeded the recommended current draw rating.
Low Battery - EVOLUTION® detected no battery installed or the battery’s power is low. Once the Low Battery alert is cleared, it will not
display again unless a Factory Reset is performed or the newly installed battery runs low again.
Low A/C Power - EVOLUTION® detected low or no A/C power.
Communication Error - EVOLUTION® encountered a communication error with the output zones.
Clearing an Alert
You can clear an Alert individually or use the CLEAR ALL command to erase them all.
Step 1 – Press
HELP/SETUP.
Step 2 – Use the Up or Down arrows to select the Alerts. Press SELECT .
Step 3 – Use the Up or Down arrows to select individual alerts or CLEAR ALL. Press SELECT .
ALERTS
CLEAR ALL
LOW BATTERY
Step 4 – Use the Up or Down arrows to conrm (Yes) or cancel (No). Press SELECT .
Local Contact
is option is available only when your local irrigation service provider or dealer has programmed the local contact information in the
controller using the Evolution Scheduling Advisor
TM
software (visit toro.com/Evolution).
Toro Contact
Access Contact Toro to get the latest contact information.
Step 1 – Press
HELP/SETUP.
Step 2 – Use the Up or Down arrows to select the Alerts. Press SELECT .
TORO CONTACT
US [phone]
TORO.COM/EVOLUTION
FOR GLOBAL SUPPORT
SEND EMAIL TO
[e-mail]