Safety data sheet

5 min.-epoxy (hardener)
Safety Data Sheet
Product code: 155110-GHS-2013
Print date: 08.08.2014 Page 4 of 7
R&G Faserverbundwerkstoffe GmbH
according to Regulation (EC) No 1907/2006
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection
programme. Wash hands and face before breaks and after work and take a shower if necessary.
When using do not eat or drink.
Protective and hygiene measures
Suitable eye protection: goggles.
Eye/face protection
When handling with chemical substances, protective gloves must be worn with the CE-label including
the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a
function of the specific working place concentration and quantity of hazardous substances. For special
purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned
above together with the supplier of these gloves.
Suitable material: NBR (Nitrile rubber), FKM (fluoro rubber)
Thickness of the glove material: > 0,5mm
Hand protection
Wear suitable protective clothing.
Skin protection
In case of inadequate ventilation wear respiratory protection. Filtering device (DIN EN 147) P2
Respiratory protection
light yellow
liquid
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
like: Amines
Odour:
Test method
pH-Value:
not determined
Changes in the physical state
not determined
Melting point:
> 100 °C
Initial boiling point and boiling range:
> 200 °CFlash point:
Flammability
not applicable
Solid:
not applicable
Gas:
not determined
Lower explosion limits:
not determined
Upper explosion limits:
ISO 2719
> 100 °C
Ignition temperature:
Auto-ignition temperature
not applicable
Solid:
not applicable
Gas:
Decomposition temperature:
not determined
Not oxidizing.
Oxidizing properties
Revision No: 1,00 Revision date: 04.12.2013 GB - EN