Use and Care Manual

7
5
6
Before uncoiling the wall, make sure the pre-punched holes
for the skimmer and pump return are at the top and facing
the planned locaon of your lter.
BEAM
BAR
SAND
DETAIL 7.1
Insert the tracks on each side of the boom plates, leav-
ing a ½’’ space betwen each, in the center of the plate
(see Illustraon 6.1).
Assemble all boom tracks to the boom plates to form
a perfect circle with a diameter and a radius in accord-
ance to the chart
Illustration 6.1
Illustration
ATTENTION INSTALLERS: The radius must be measured from the center of the track cavity, where the wall will be in-
stalled, to the center of the pool. Before unrolling the wall, make sure the space between tracks is equal all around the
perimeter. To display the tracks and not have a perfect circle in accordance to the chart would greatly complicate the
following installaon instrucons and could cause irreparable damage to the structure of the pool as a whole during
8' 2,31 m (7' - 7") 1,16 m (3' - 9 1/2") 12 12
10' 3,05 m (10' - 0") 1,52 m (5' - 0") 12 12
12' 3,68 m (12' - 1") 1,84 m (6' - 1/2") 10 10
15' 4,57 m (15' - 0") 2,29 m (7' - 6") 10 10
18' 5,44 m (17' - 10") 2,72 m (8' - 11") 12 12
21' 6,38 m (20' - 11") 3,19 m (10' - 5 1/2") 14 14
24' 7,29 m (23' - 11") 3,64 m (11' - 11 1/2") 16 16
27' 8,18 m (26' - 10") 4,09 m (13' - 5") 18 18
Alpha
POOL DIAMETER
POOL RADIUS
NUMBER OF TRACKS
NUMBER OF PLATES