Use and Care Manual

4
Control Panel Functions
Timer Display Temperature Display
Mode Display Function Button
A B
C
Power Switch
E
D
Turn on the power switch and press the ON/OFF button to turn on the heater.
Press MODE button to select the heat setting.
Press ON/OFF
button again , the LED will be turned off and the heater
will stop working . When the heater is turned on , press MODE button
to select appropriate setting . which is shown in the LED as follow :
The heater will
automatically set the temperature to default mode (30 °C), If the temperature is not
set within 2 minutes after turning on the heater.
1. Check that neither the appliance nor the power cable has been damaged in
any way during transportation when first using the heater.