Use and Care Manual

10
Operation
Clearance cutting
The cutting head is guided parallel to the ground. When
clearance cutting, guide the lawn trimmer in a semi-circle in
front of your body.
Edge cutting
The edge cutting function allows you to trim precisely and
comfortably along the edge of the lawn.
Changing the operating mode
1. Press downwards and hold the locking button on the shaft
coupling
1
(see Figure 11). Turn the lower shaft by 90°
2
. The
arrow on the locking button coincides with the arrow on the
shaft coupling. Release the locking button
3
. Check latching
by slightly twisting!
Switching the Line Trimmer ON
First press and hold the switch interlock
1
. Then press the On/
Off switch
2
(see Figure 12).
Switching the Line Trimmer OFF
Release the On/Off switch (see Figure 13).
Note that the line continues running for a few seconds
when the lawn trimmer has been switched off.
1
2
3
Figure 11
!
CAUTION
1
2
Figure 12
Figure 13
RELEASE ON/
OFF SWITCH TO
STOP
Downloaded from www.Manualslib.com manuals search engine