Manual

5
DXi User Manual
Chapter 1: Introduction
Communication Add-on
M8C Cellular Kit
M8W WIFI Kit
M8U UHF Radio Kit
Other Add-ons
P ProMax Remote Receiver Kit
E WOB Controller- 900MHZ XTND Radio Kit (WMS DXi Only)
PE Pro Max Remote Receiver Kit with 900MHZ XTND Radio Kit
(WMS DXi Only)
Some examples:
A product label that reads DXi-PWMTWM8WE is therefore a DXi Painted Wall
Mount controller (PWM) with a Two-Wire Output (TW), a Communication option
that uses WiFi (M8W) and a WOB Controller radio kit(E). Because of the presence
of the WOB controller radio kit, this controller can only support Sentinel Firmware
(DXi-FMW-WMS).
A product label that reads DXi-SPED40M8UPE is a DXi Stainless Steel Pedestal
controller (SPED) with 40 conventional output station controls (40), a UHF radio
communications option (M8U), a Pro Max remote control receiver (P) and a WOB
controller radio kit (E). Because of the presence of the WOB controller radio kit, this
controller can only support Sentinel Firmware (DXi-FMW-WMS).
A product label that reads DXi-DPSB64PE is a DXi Double Wide Stainless Steel
Controller (DPSB) with 64 conventional output station controls (64), a Pro Max
remote receiver (P), and a WOB controller radio kit (E). Because of the presence of
the WOB controller radio kit, this controller can only support Sentinel Firmware
(DXi-FMW-WMS).
A product label that reads DXi-SPEDHY48M8U is a DXi Stainless Steel Pedestal
(SPED) with hybrid two-wire and conventional output support for 48 stations (48),
with UHF radio as the communication option. Because there is no WOB controller
radio kit in the product, it could either be a Sentinel or a Laguna controller. The
controller’s firmware can be identified by reading the “About” screen under the
Review button function on the face plate.