Manual

DXi User Manual

Chapter 11: Review

Program Review

Program Review displays five screens of information related to the selected irrigation

program.

1/5:

• Program Valid: Yes or No. For a program to be valid, it must have four

settings: a Start Time, a Run Time, water days, and assigned stations.

• Start Duration: Displays how long the entire irrigation program will run in

hours and minutes.

• Water Use per Start (gal): Displays the number of gallons the irrigation

program uses. Water usage is calculated based off the nominal station flow

value. See Chapter 7, Stations for entering nominal flow values or performing

a Learn Flow

• Start Times: Shows the start and end times for each program start.

When toggling between program numbers, it is common for the controller to

have a 1-2 second delay before populating the data.

Program 001

Program Valid Yes

Start Duration: 1:24:00

Water Use per Start (gal): 0

Start Times:

06:15AM 07:39AM 08:00PM 09:24PM

--:--AM --:--AM --:--AM --:--AM

Program 1 Review WED 5:43:40 PM

|1/5|2/5|3/5|4/5|5/5|