Manual

60
DXi User Manual
Chapter 8: Alerts
Upon review of the alert, maintenance personnel would repair the problem and
then clear the alert at the controller. (Clearing the alert re-enables all irrigation at the
station).
Any time an alert is triggered, the DXi screen displays the alert type.
Anaylzing an Alert
Alerts can be accessed for analysis from the Main Menu.
Alert #: Displays the alert number out of the total number of alerts.
to cycle through the alerts.
Type: There are eleven different types of alerts. See Alert List below.
Recorded: Displays the date and time the alert was triggered.
P/MV: If the alert was related to a pump or master valve, the number of the
pump or master valve would be displayed here.
Stn: If the alert was station specific, the number would be displayed here.
Limit: If the alert was limit related (for example, the DXi controller measured a
low flow limit violation), the limit field would display the lower limit value and the
measured flow value.
Clearing Alerts
1. to scroll through alerts.
to to clear an alert.
To quickly clear all alerts, scroll to the last alert logged and clear, this is the
alert type 'Clear to Erase All Alerts'.
Alert #:001 of 004
Type: Controller reset
Recorded: 05/25/21 17:41
P/MV: ---
Stn: ---
Limit: 1:03 m:s off
Press ‘A’ to clear alert ‘B’ to clear all
Alerts WED 5:43:40 PM