Manual

DXi User Manual

Chapter 7: Reports and Diagnostics

Communications

ENET

The TCP/IP diagnostic screen displays TCP/IP configuration information, including

your controller’s IP address, DNS, NetMask, and Gateway.

Ethernet link status is a handy tool to determine whether you have

a valid network connection or not.

CELL

The Cellular diagnostic screen displays cellular configuration information.

Select the Refresh Status command to confirm successful cellular communication.

WiFi

The WiFi diagnostic screen displays WiFi configuration information.

Select the Refresh Status command to confirm successful WiFi communication.

IP: 194.25.3.130

DNS: 194.25.3.129

NetMask: 255.255.255.0

Gateway: 194.25.3.1

MAC: 00:24:09:09:03:00

Link: Link Active, 100Mb/s

Full, RX/TX-Normal

Communication WED 5:43:40 PM

IP: 10.161.111.196:10001

Operator: AT&T

IP Protocol: TCP

Connection: socket open

APN: iot.aer.net

Signal Strength: -91dBm (2 bars)

IMEI: 357520071430233

Cloud Set: 52.38.147.121:5101

Association: connected to Internet

ICCID: 89011702272077318852

Refresh Status Idle

Communication WED 5:43:40 PM

IP: 192.168.233.79:0

SSID: toroguest

Encryption: NONE

MAC: 409D82A133

Signal Strength: 21 margin (5 bars)

Cloud Set: 50.112.190.84:5101

Status: connected to access point

DHCP: YES

DNS: 8.8.8.8

NET MASK: 255.255.255.0

GATEWAY: 192.168.233.254

Refresh Status Idle

Communication WED 5:43:40 PM