Manual

40
DXi User Manual
Chapter 5: Program Entry
Start Times
The DXi controller is capable of handling 12 start times per program. The Start
Time is defined as the precise time of day that a given irrigation or auxiliary program
begins.
The procedure to set Start Times was covered in Chapter 3: Quick Start .
!
Be sure that a program's Start Time does not conflict with the previous
program's Run T ime. If there is overlap, the second start time will be skipped
and irrigation will not occur.
Water Days
The DXi controller offers three modes with which to create an irrigation schedule.
• 14-day: Create an irrigation schedule over a two-week water cycle.
• 31-day: Create an irrigation schedule over a 31-day water cycle.
• Interval: Create an irrigation schedule with a specified number of days
between irrigation.
Using the Control Dial, operators can individually assign active irrigation days
within the 14-day or 31-day time frame. Operators can also select Alternate or
Reverse for quick assignment of irrigation days.
The procedure to set Water Days was covered in Chapter 3: Quick Start.
Start Time 1 Start Time 4
06:15AM --:--AM
Start Time 2 Start Time 5
08:00PM --:--AM
Start Time 3 Start Time 6
--:--AM --:--AM
Program 1 Start Times WED 5:43:40 PM
|1-6|7-12|
Schedule Type: 14-DAY
Sun Mon Tue Wed Thu Fri Sat
Apply: Alternate Reverse All None
Program 1 Watering Days WED 5:43:40 PM
14-DAY
31-DAY
INTERVAL