Manual

35
DXi User Manual
Chapter 4: Setup
Time/Date
The date and time can be set at any time on the DXi controller.
1) to switch between fields.
2) to enter highlighted field.
3) to adjust values in that field.
4) to set desired option.
5) Repeat steps 1-4 as needed.
Firmware Update
Toro continually strives to enhance the performance and functionality of its
controllers. Occasionally, a firmware update might be necessary for your controller.
Steps
1. Download the latest firmware driver from Toro's website. Copy file to root drive
on a USB drive in folder labeled “FirmwareUpdate”. Be sure your DXi controller
is on.
2. Accessing the TM from the bottom, insert the USB thumb drive with the latest
firmware update on it into the USB slot.
3. The controller will display a message and beep to let you know it has detected a
USB thumb drive.
4. Navigate to Setup-->Page 2-->Firmware Update. .
5. The DXi will update the firmware. Once complete, the DXi will display reset.
6. Remove the USB thumb drive.
An instructional video on how to update firmware is located on the Toro
website, www.rainmaster.com.
Time Format 24-Hour
Time 5:43PM
Date 02/08/17
Sync time to cloud No
Std Time Zone MST/UTC-0700
DST Mode U.S.
Setup Time/Date WED 5:43:40 PM
24-Hour
AM/PM
Firmware update complete
Firmware Update WED 5:43:40 PM