Manual
34
DXi User Manual
Chapter 4: Setup
Current Checks
The DXi controller allows the operator to limit and view the controller’s output
current (Amps) usage. Much like established flow limits aid in the detection of
problems with the system, establishing current limits aids in detection of field wiring
problems associated with any station. Monitoring features include:
• Display of the total, instantaneous current on a per station basis
• Automatic termination of station output and reporting of station status when
the preset maximum current is exceeded
• Automatic termination of station output and reporting of station status when
current stays below the pre-set minimum
• Review of station status reports via the Warning/Alarm display
• Automatic current limit setup.
For a complete explanation on current monitoring,
please see Appendix C: Current Monitor.
To Enable Max and/or Min Current Limit Checking:
1) to switch between the check boxes.
2) to turn on or off desired option.
Current limits can be set manually (Stations-->Current) or
"learned" (Setup-->Learn Flow/Current).
Enable Max Current Limit
Enable Min Current Limit
Setup Current Checks WED 5:43:40 PM