Manual

DXi User Manual

Chapter 4: Setup

Pressing the 'B' button will "close out" the edit at the cursor position, deleting

any characters to the right of the cursor.

Once all fields have been updated, select 'Program WiFi Now' to save settings to the

WiFi communication modules memory.

hen complete the field will update to 'complete'.

Changing Frequency on an M7/M8 Radio

1. Push Enter (Control Dial) to get into the sub menu.

2. Press the Setup key, then the Communications key.

3. Scroll or tab over to the M7/8 tab.

4. Highlight the frequencies to be changed and hit Enter. Use the Control Dial

to change each number of the frequency. Hit Enter when done setting each

number.

5. Select either M7 or M8 by highlighting and hitting Enter.

6. Scroll down to Program Radio Now and hit Enter.

The M7 radio is used in the Base Station connected to the central computer.

The M8 is the radio mounted inside an irrigation satellite.

Cell

The Cell page provides two troubleshooting functions that can be used if the

controller disconnects and fails to reconnect to the cloud. Listen ports are for

advanced configurations and should only be changed/modified a qualified Toro

service professional.

Tx (MHz):464.5000

Rx (MHz):464.5000

Raveon: M7 M8

Program Radio Now Idle

Setup Communication WED 5:43:40 PM

Listen Port - TCP:10001

Program Cell Now Idle

Setup Communication WED 5:43:40 PM