Manual

14
DXi User Manual
Chapter 3: Quick Start
Setting Current Date and Time
1) Setup
2) Time/Date
3) Switch between the 3 time/date fields.
4) Using the navigation techniques from page 14, adjust fields as necessary.
5) Repeat as necessary for the other fields. When done, press
Station Count
Page 2 of the Setup menu shows Station Count.
Setting the correct number of stations for the DXi system is required for proper
controller operation. The station count variable dictates how many stations participate
in the Learn Current/Flow events. If the wrong number of stations are entered, the
Learn Current and Learn Flow events do not operate correctly.
Communication with Central
DXi controllers can communicate with a Central computer running Laguna so that
the Central can manage multiple controllers. For information on setting up this
system-wide communication, please go to page 30.
Time Format 24-Hour
Time 5:43PM
Date 02/08/17
Sync time to cloud No
Std Time Zone MST/UTC-0700
DST Mode U.S.
Setup Time/Date WED 5:43:40 PM
24-Hour
AM/PM
Station Count 048
Station Count WED 5:43:40 PM
WED 5:43:40 PM
Firmware Station
Update Count
Master Valves
& Pumps
FLOW MAX Program
Decoder
Setup
|Page 1|Page 2|