Manual

110
DXi User Manual
Appendix B: Flow Sensors
Limit Checking with Two or More Flow Meters
When two flow meters are used, you may select which meter is used for limit
checking. Alternately, you may check the total flow from both meters. Do this by:
1. Under Setup --> Flow --> Flow Sensors, the Include in Total Flow setting must
be set to YES for both meters.
2. Under Setup --> FLOW MAX, the Sensors must be activated under "Devices
Connected to this Clock".
Flow Meter Reading
1. Go to REVIEW-->Flow Review.
2. The meter flow readings for Flow 1, Flow 2, and Flow 3 are shown in Gallons-
Per-Minute. Readings are updated every 10 seconds.
Sensor 1 Type FS-B100
Sensor Name ?
K Factor 00109
Offset 0027
Include In Total Flow YES
Connection Type Decoder
Setup Flow Sensors WED 5:43:40 PM
|Sensor 1|Sensor 2 | Sensor 3
FLOWMAX Participant
Devices Connected to this Clock:
Pumps: 1 2
Master Valves: 1 2 3
Flow Sensors: 1 2 3
Setup FLOWMAX WED 5:43:40 PM
Water Usage WED 5:43:40 PM
|Water Use|Flow Rates|
Local Remote Total
Flow 1 0 0 0
Flow 2 0 0 0
Flow 3 0 0 0
TOTAL 0 0 0
Min Flow 0 0 0
Expected 0 0 0
Max Flow 0 0 0