Product Literature

2 | P a g e P a r t N o . 5 0 0 6 7 6 R e v . A
2.0 - Scheduling Capabilities
2.1 Operation of 16 conventional programs with 8 start times per program.
2.2 Watering based on 6-week cycles or interval water schedules.
2.3 Continuous cycling of programs based upon user established start and end times, with a
programmable delay/soak time.
2.4 Water budget per program from 10 to 250% in 1% increments for adjustment of program
run times.
2.5 Program by time.
2.6 Programmable water total notifies and can terminate over-budget irrigation. Volumetric
total can be set on a per program basis.
2.7 Quick station programming allows groups of stations to be programmed with the same
runtime.
2.8 Programmable water window
2.9 Repeat cycle programming.
2.10 Programable rain delay.
2.11 Manual rain shut-off.
3.0 - Program Setup Options
3.1 Rain sensor assignment by program.
3.2 Irrigation programs, lighting programs, security, etc. (Non-irrigation programs are
independent of rain shutdown mode.)
3.3 Cycle and soak programming by station.
3.4 Runtimes from 1 second to 4 hours and 15 minutes, programmable in hours/minutes or
minutes/seconds.
3.5 Program review options to view schedules at a glance.