Product Literature

ManualsBrandsUnbranded ManualsCentral ControlDXi™ Central Control System

1 | P a g e P a r t N o . 5 0 0 6 7 6 R e v . A

The DXi™ irrigation controller shall be manufactured by The Toro Company. The controller

shall have the following features and functions:

1.0 - Hardware Features

1.1 Available in painted or stainless steel wall mount cabinet, stainless steel single and double

wide pedestal and plastic pedestal.

1.2 Conventional station configurations options range from 8 to 204*, 2-Wire configuration

option from 1 to 204 and Hybrid systems range from 8 to 204 stations. Dedicated outputs

for one configurable NO/NC master value and one for a pump. Connect up to 10 master

values and 10 pumps when using station outputs.

*Utilization of local 8-station outputs plus wireless output boards.

1.3 Connectivity for three flow sensors, three pulse input type devices e.g. rain bucket & ET,

and three alarm input (open/closed) devices.

1.4 4.4” QVGA HR-TFT reflective TFT LCD monochrome display and backlight.

1.5 Built-in remote control jack for ProMax

™

. Permanent internal remote mount available.

1.6 Built-in transient protection.

1.7 Built-in lightning protection.

1.8 Audible tones and illuminating overlay for user feedback.

1.9 Lifetime retention of the user’s program data without the use of batteries.

1.10 All outputs are protected from field wiring short circuits.

1.11 Built in amperage meter to accurately measure and diagnose valve solenoid electrical

problems.

1.12 Modular architecture. Modular output boards (8-station) facilitate maintenance and

eliminates total controller down time. Modular wireless communication options available

for connection to central software.

1.13 Accessible power junction box with GFCI protected dual 120 VAC outlet and power smitch

for irrigation controller maintenance.

1.14 Built-in port to connect 900MHz radio for wireless output boards (WOBs) compatibility.

Communicate to up to 4 WOBs per satellite.

Summary of content (4 pages)

PAGE 1
The DXi™ irrigation controller shall be manufactured by The Toro Company. The controller shall have the following features and functions: 1.0 - Hardware Features 1.1 Available in painted or stainless steel wall mount cabinet, stainless steel single and double wide pedestal and plastic pedestal. 1.2 Conventional station configurations options range from 8 to 204*, 2-Wire configuration option from 1 to 204 and Hybrid systems range from 8 to 204 stations.
PAGE 2
.0 - Scheduling Capabilities 2.1 Operation of 16 conventional programs with 8 start times per program. 2.2 Watering based on 6-week cycles or interval water schedules. 2.3 Continuous cycling of programs based upon user established start and end times, with a programmable delay/soak time. 2.4 Water budget per program from 10 to 250% in 1% increments for adjustment of program run times. 2.5 Program by time. 2.6 Programmable water total notifies and can terminate over-budget irrigation.
PAGE 3
4. 0 - Maintenance and Alarm Diagnostic Capabilities 4.1 Flow monitoring. Automatic alarm processing (which provides station and/or master valve shut down and program advance as required) diagnosing and reporting station underflow and overflow, mainline breaks, and unscheduled flows. 4.2 Electrical field wire monitoring. Automatic alarm processing (which provides station shutdown and program advance/pause) for station over current, short circuits, broken field wiring or faulty solenoids. 4.
PAGE 4
connect controllers. 5.5 Compatible with up to 3 Toro® AC flow decoders (TW-DAC-FLOW) per controller. For use with most pulsed output 2 and 3 wire flow sensors. 5.6 Compatible with up to 16 Toro AC moisture decoders (TW-DAC-SOIL) per controller. For soil moisture and temperature monitoring and evaluation. 5.7 365-day calendar for selecting watering restriction days. Up to 48 omit days allowed 5.8 Programmable security levels. 5.