Product Literature

ManualsBrandsUnbranded ManualsCentral ControlDXi™ Central Control System

1 | P a g e P a r t N o . 5 0 0 6 7 5 R e v . D

The DXi™ irrigation controller shall be manufactured by The Toro Company. The controller

shall have the following features and functions:

1.0 - Hardware Features

1.1 Available in painted or stainless steel wall mount cabinet, stainless steel single and double

wide pedestal and plastic pedestal.

1.2 Conventional station configurations options range from 8 to 96* in multiples of 8, 2-Wire

configurations and Hybrid systems range from 1 to 200 stations (48 conventional & 152 2-

Wire). Dedicated outputs for three configurable NO/NC master values and two dedicated

outputs for pumps.

*Note conventional station counts above 48 requires specific enclosure.

1.3 Connectivity for three flow sensors, three pulse input type devices e.g. anemometer, rain

bucket & ET and three alarm input (open/closed) devices.

1.4 4.4” QVGA HR-TFT reflective TFT LCD monochrome display and backlight.

1.5 Built-in remote control jack for ProMax

™

. Permanent internal remote mount available.

1.6 Built-in transient protection.

1.7 Built-in lightning protection.

1.8 Audible tones and illuminating overlay for user feedback.

1.9 Lifetime retention of the user’s program data without the use of batteries.

1.10 All outputs are protected from field wiring short circuits.

1.11 Built in amperage meter to accurately measure and diagnose valve solenoid electrical

problems.

1.12 Modular architecture. Modular output boards (8-station) facilitate maintenance and

eliminates total controller down time. Modular wireless communication options available

for connection to central software.

1.13 Accessible power junction box with GFCI protected dual 120 VAC outlet and power smitch

for irrigation controller maintenance.

Summary of content (4 pages)

PAGE 1
The DXi™ irrigation controller shall be manufactured by The Toro Company. The controller shall have the following features and functions: 1.0 - Hardware Features 1.1 Available in painted or stainless steel wall mount cabinet, stainless steel single and double wide pedestal and plastic pedestal. 1.2 Conventional station configurations options range from 8 to 96* in multiples of 8, 2-Wire configurations and Hybrid systems range from 1 to 200 stations (48 conventional & 152 2Wire).
PAGE 2
.0 - Scheduling Capabilities 2.1 Operation of 16 conventional programs with 12 start times and up to 200 ISC (individual station control) or a combination of each. 2.2 Watering based on 14-day calendar, 31-day calendar, odd/even or interval water schedules. 2.3 Continuous cycling of programs based upon user established start and end times, with a programmable delay/soak time. 2.4 Water budget per program from 0 to 999% in 1% increments for adjustment of program run times. 2.5 Program by time. 2.
PAGE 3
4. 0 - Maintenance and Alarm Diagnostic Capabilities 4.1 Flow monitoring. Automatic alarm processing (which provides station and/or master valve shut down and program advance as required) diagnosing and reporting station underflow and overflow, mainline breaks, and unscheduled flows. 4.2 Electrical field wire monitoring. Automatic alarm processing (which provides station shutdown and program advance) for station over current, short circuits, broken field wiring or faulty solenoids. 4.
PAGE 4
5.0 - Miscellaneous Features 5.1 Central control capable with Laguna™ Software. 5.2 Operates as a standalone. 5.3 Automatic limit setup (learn mode) for flow and current. Global percentage adjust for limit establishment. 5.4 ProMax Connect™ smartphone application compatible for cellular, Ethernet and WiFi connect controllers. 5.5 Compatible with up to 3 Toro® AC flow decoders (TW-DAC-FLOW) per controller. For use with most pulsed output 2 and 3 wire flow sensors. 5.