Manual

89
DXi User Manual
Chapter 12: Troubleshooting
Station / Valve Does Not Water (continued)
Is the MV and/or
pump light
on?
Is
the electrical
current within
the expected
range?
Yes
Yes
Yes
Refer to master valve
and pump setup.
Isolate problem to field
wiring / valve solenoid or
controller as follows:
At the station output board,
swap the station wires of
the defective station with
a known working station.
No
No
Isolate problem.
No
from
previous page
Does
a master valve
or pump need to be
turned on for the
station to
operate?
next page