Manual

74
DXi User Manual
Chapter 11: Review
• Ran Today: The number of minutes the station was active.
• Soak Remain: Displays the Soak time left (if any) from the Cycle and Soak
setting.
Flow Review
Flow Review displays information about the various flow meters (if any) that are
added to the system, as well as the system Flow Limits.
All of this information is set under Setup --> Flow.
About
Version
Displays the controller name, version, checksum, build, bootloader type/version, the
controller serial number (set at factory), and Cloud ID (set at factory).
Peripheral
Displays any attached peripheral ID and firmware version.
Flow Review WED 5:43:40 PM
Flow 1: Type: Data Industrial
Add To Total: YES
Flow 2: Type: Data Industrial
Add To Total: YES
Flow 3: Type: Data Industrial
Add To Total: YES
Volumetric Limits
Monthly Limit 000000000
Flow Limits
Main Line Limit 000000
Unscheduled Limit 0000
Maximum Flow Limit Check: Disabled
Minimum Flow Limit Check: Disabled
Powered By: Sentinel WMS
Firmware: DXi v4.3.36 (9A95)
Build: 20210525 155303
Loader: Flash, v35305
Serial #: 321999028
Cloud ID: 03000401
About WED 5:43:40 PM
|Version|Peripheral
MVSB: 1.10 ID:1991570062584945,
GW: 2.5
About WED 5:43:40 PM
|Version|Peripheral