Manual

67
DXi User Manual
Chapter 10: Manual Operation
Sequence
Sequence allows stations to be activated in a non-linear sequence.
To Activate a Sequence Operation:
1) to enter Station# field.
2) to select desired station. Set it.
3) to Run Time field.
4) to set a run time. Set it.
5) to Add field. to add station to the sequence.
6) Repeat steps 1 - 5 to add as many stations as desired to the sequence.
4) To begin the manual program, to Start field. to start.
Irrigation will begin immediately.
To Cancel a Manual Sequence Operation:
Once a Sequence operation has started, the Start field will read Stop.
1) to the Stop field and .
- or -
1) Hit the All Stop button (which stops all irrigation, not just the Sequence).
Station# 001
Run Time 060
Add Start
Status: Off
Sequence:
Press ‘A’ to clear manual sequence.
Manual Sequence WED 5:43:40 PM