Manual

51
DXi User Manual
Chapter 7: Reports and Diagnostics
Diagnostics - General
Output Test
The Output Test verifies controller output functionality. Use the Control Dial to
set the range of stations to test, adjust the duration (test time per station), and to
manually start and, if desired, stop the test.
The DXi controller will display flow and current information as it cycles through the
stations.
Display Test
The Display Test turns on ever pixel on the display to ensure every pixel is
functioning.
Output
Test
Program
Test
Comm.
Devices
Display
Test
Sensor Board
Status
Keypad
Test
Diagnostic Tests
General
WED 5:43:40 PM
Test Stations 001-048
Duration 00:01
Start Now
Previous Next
Status: Off
Flow: 0 (GPM) Cur:0.01
Output Test WED 5:43:40 PM
Display Test:
Initiate Test
Display Test WED 5:43:40 PM