Manual

47
DXi User Manual
Chapter 6: Station Options
Wireless IP
All the above options apply but the additional Socket Number is needed. The Socket
Number tells the controller what IP address and socket the communication should be
sent to. Sockets may be setup in the WMS software and sent to the controller.
AC Decoder
AC Decoder requires a gateway address (set to 001 in almost all cases) and the
decoder number you wish to operate.
Other supported station types are Wireless, Baseline and DC Decoder.
These are obsolete and mentioned only for retrofit purposes (next page).
Station 001
Type Wireless IP
Precode 000
Board # (0-30) 000
Output # (1-48) 010
Socket # (1-4) 001
Stations
|Flow|Misc|Cycle & Soak|Type
WED 5:43:40 PM
Station 001
Type AC decoder
Gateway (001) 001
Decoder # 022
Stations
|Flow|Misc|Cycle & Soak|Type
WED 5:43:40 PM