Manual

42
DXi User Manual
Chapter 5: Program Entry
% Adjust
Setting the % Adjust Value field affects irrigation only for that specific program. For
example, if you set a % Adjust value of 50% for Program 1, run times that are set to
20 minutes will only run for ten. Program 2 run times will be unaffected.
If you set the % Adjust value to 150% for Program 2, run times set for 20 minutes
will now run for 30. Program 1 run times will be unaffected.
The procedure to set % Adjust was covered in Chapter 3: Quick Start .
Water Window
Setting the Water Window Start and End fields dictates when irrigation is permitted
to occur. Programs will not start outside the water window. If a program is still
running at the water window end time, the irrigation will shutdown and no further
stations in the program will run. You may disable the water window by setting the
start and end times to the same time (pictured).
Manual irrigation operations will override the Water Window settings.
% Adjust Value 50
Program 1 % Adjust WED 5:43:40 PM
Water Window Start / End
12:00AM 12:00AM
Program 1 Water Window
WED 5:43:40 PM