Manual

39
DXi User Manual
Chapter 5: Program Entry
Run Times
The DXi controller allows the user to individually set a run time for each station. The
procedure to set Run Times was covered in Chapter 3: Quick Start .
To switch between entering run times in hours:minutes vs minutes:seconds,
see OPT INs, next page.
Program Hold
A Program Hold can be set, suspending all irrigation activity for that program only
for the specified number of days or until manually canceled.
Actively setting a Program Hold for a program will cancel all activity for that
program, including non-irrigation activity (see OPT INs next page).
To set a Program Hold for all irrigation programs, do so from
the Main Menu screen utilizing the Rain Hold feature.
The procedure to set a Program Hold was covered in Chapter 3: Quick Start .
To Cancel a Program Hold
1) so that the Cancel Program Hold field is highlighted (see above).
2) to cancel.
Station 1 Station 4
00:10 00:10
Station 2 Station 5
00:10 00:10
Station 3 Station 6
00:10 00:10
Program 1 Run Times WED 5:43:40 PM
|1-6|7-12|13-18|19-24|25-30|>
Times are in HH:MM
Hold Duration 05 (Days)
Cancel Hold
Program 1 Hold WED 5:43:40 PM