Manual

38
DXi User Manual
Chapter 5: Program Entry
Start Times
The DXi controller is capable of handling 12 start times per program. The Start
Time is defined as the precise time of day that a given irrigation or auxiliary program
begins.
The procedure to set Start Times was covered in Chapter 3: Quick Start .
!
Be sure that a program's Start Time does not conflict with the previous
program's Run T ime. If there is overlap, the second start time will be skipped
and irrigation will not occur.
Water Days
The DXi controller offers three modes with which to create an irrigation schedule.
Using the Control Dial, operators can individually assign active irrigation days within
the six week time frame. Operators can also select Alternate, Reverse, or
All or None for quick assignment of irrigation days.
The procedure to set Water Days was covered in Chapter 3: Quick Start.
Start Time 1 Start Time 4
06:15AM --:--AM
Start Time 2 Start Time 5
08:00PM --:--AM
Start Time 3 Start Time 6
--:--AM --:--AM
Program 1 Start Times WED 5:43:40 PM
|1-6|7-12|
Currently Wednesday of Week 2
Su Mo Tu We Th Fr Sa
Wk 1
Wk 2
Wk 3
Wk 4
Wk 5
Wk 6
Apply: Alternate Reverse All None
Program 1 Watering Days WED 5:43:40 PM