Manual

35
DXi User Manual
Chapter 4: Setup
• Wireless LR (for radio used for Wireless LR communications)
• CTM source – When communications arrive on this port, they should be
routed to the CTM Destination port.
Note: The CTM Destination indicates the port to which CTM
communications should be sent. If not used, set this option to Not Installed.
Master Valves & Pumps
This screen allows the operator to setup up current limits for the master valves and
pumps that can be connected to the DXi controller.
The master valve can be set as either Normally Closed (N.CL.) or
Normally Open (N.OP.)
It is also possible to have the DXi controller "learn" the different current settings for
the MV or pump installed.
Connection
Used to distinguish between a 2-Wire or conventional MV / Pump.
WED 5:43:40 PM
Master/Pump MV1
Connection Local
Master Type N.CL.
Minimum Current 1.00
Nominal Current 1.50
Maximum Current 2.00
Learn Current
Masters & Pumps
N.CL.
N.OP.
MV1
MV2
MV3
PU1
PU2