Manual

DXi User Manual

Chapter 4: Setup

Press or to get to the next group of Omit Days.

Communication

General

The controller can communicate with the Central running Sentinel WMS in any one

of five methods:

• 4G LTE

• UHF radio

• Wifi

• 3G

• Other

If a device is detected, the controller will set this option.

The Unit Code can be any number between 001 and 999. If you were to have more

than one DXi controller attached to any one Central computer, be sure they have

different Unit Code addresses.

Group Code is any number from 001 to 999. When set, the Sentinel Water

Management Software (WMS) can send communication commands simultaneously to

a group of satellites with the same Group Code number. Note that each satellite will

not respond to this transmission but will act on the transmission if the command is a

"group eligible" command such as a Rain Shutdown.

Use the Control Dial to activate, select a communication method, and assign an

address for these fields.

Press or to get to “Ethernet” screen.

Off

Ethernet

Wi-Fi

Cellular

Unit Code: 001

Comm Option Device:

WiFi

Group Code: 240

Cloud Connect: Ethernet

Setup Communication WED 5:43:40 PM

4G LTE

UHF radio

WiFi

Other

None