Manual

28
DXi User Manual
Chapter 4: Setup
ET Options
Maximum Total Program ET is the maximum ET value that can be accumulated
between watering days. This value is the maximum value that a program will ever
replace in a single day. Typically choose a value that is your maximum daily ET
multiplied by the number of days between watering.
Monthly Daily Default ET (evapotranspiration) is the minimum ET figure (in
millimeters) that is used as the default ET regardless of the weather conditions or if
data is missing from the ET gauge or weather station. ET can vary depending on the
time of the season and weather. Generally, daily ET can be from 0mm to 13mm.
Omit by Date
The DXi allows up to 48 days to be excluded from irrigation per year.
Dates can be excluded in the following ways:
annual - the exclusion occurs once per year, every year
one-time - the exclusion occurs only on the date specified
disabled - the excluded date is not excluded
Steps
1) Omit by Date
2) to navigate to field to set. Fields that can be changed are:
month, date, year (if not “Annual”), and the omit type.
3) to enter selected field.
4) to switch between options.
5) to set desired option.
6) Repeat steps 1 - 4 for all days to omit.
Maximum Total Program ET
00.00 (in)
Monthly Daily Default ET:
JAN 00.00 (in)
ET Options WED 5:43:40 PM
Omit 1: 12/31 Annual
Omit 2: 07/04 Annual
Omit 3: 05/05/17 One-Time
Setup Omit by Date WED 5:43:40 PM
|1 - 3|4 - 6|7 - 9|10 - 12|>
Annual
One-Time
Disabled