SDS

Nisus DSV Specimen Label • SAL102110 • page Page 15 of 18
instructions for foam guns: Pour concentrate into
foam gun bottle and attach bottle to spray nozzle
and ensure gun is attached to hose. Note: See foam
gun instructions for more information. Make sure the
setting is set for a 1:103 dilution. Once in place,
squeeze the handle to disperse foam solution. To
disinfect, all surfaces must remain wet for 10
minutes. Foam guns not for use in California.
3. Scrub surface using deck brush or other coarse
material as necessary.
4. Rinse surfaces thoroughly and let air dry.
Note: Rinsing is not necessary unless floors are to be
coated with finish or restorer. All food contact surfaces,
such as appliances and kitchen countertops, must be
rinsed with potable water. Do not use this product to
clean or disinfect glassware, utensils, dishes or interior
surfaces of appliances.
FUNGICIDAL / MOLD & MILDEW
FUNGICIDAL ACTIVITY: At 2 ounces per gallon use-
level, (or equivalent use dilution) this product is effective
against Trichophyton mentagrophytes – athlete’s foot
fungus, (a cause of Ringworm) and Candida albicans on
inanimate, hard, non-porous surfaces in the presence of
5% blood serum and 400 ppm water hardness as Ca-
CO
3
in locker rooms, dressing rooms, shower and bath
areas, and exercise facilities. Pre-clean all surfaces pri-
or to using this product. Treated surface must remain
wet for 10 minutes. Allow solution to air dry on surface
and repeat treatment every seven days or when new
growth appears.
MOLD AND MILDEW CONTROL DIRECTIONS: This
product controls the growth of mold and mildew, Asper-
gillus niger and their odors on hard, non-porous surfac-
es. To control the growth of mold and mildew and their
odors on hard, non-porous surfaces, apply use solution
of 1 1/4 oz. of this product per one gallon of water.
Thoroughly wet all treated surfaces completely. Allow
surface to remain wet for 10 minutes. Let surface air
dry. Repeat application weekly or when growth or odor
reappears.
TO CONTROL THE GROWTH OF MOLD AND
MILDEW ON LARGE INFLATABLE NON-POROUS
PLASTIC AND RUBBER STRUCTURES (animals,
promotional items, moonwalks, slides, obstacle course
play and exercise equipment): Thoroughly clean all
surfaces with soap or detergent and rinse with water.
Saturate surfaces with a use solution of 1 1/4 oz. of this
product per one gallon of water for a period of 10
minutes. Ventilate buildings and other closed spaces. Do
not use equipment until treatment has been absorbed,
set or dried.
TO CONTROL THE GROWTH OF MOLD AND MIL-
DEW ON NON-POROUS ATHLETIC EQUIPMENT: For
use on wrestling and gymnastic mats, athletic training
tables, physical therapy tables, athletic helmets, wres-
tling/boxing headgear, athletic shoe soles. Thoroughly
clean all surfaces with soap or detergent and rinse with
water. Saturate surfaces with a use solution of 1 1/4 oz.
of this product per one gallon of water for a period of 10
minutes. Ventilate buildings and other closed spaces. Do
not use equipment until treatment has been absorbed,
set or dried.
HUMIDIFIER DIRECTIONS: Formulated for use in
portable humidifiers. Thoroughly clean the hard, non-
porous surfaces of the water tank and filters, before
each heating season, or sooner if necessary. Add 2 oz.
of this product per gallon of refill water. When you refill
the tank, add 2 ounces of this product for every gallon of
water added. Not for use in heat or atomizing type
humidifiers.
DEODORIZATION
GENERAL DEODORIZATION: To deodorize, add 1 1/4
ounce of this product to 1 gallon of water (or equivalent
use dilution). Excess liquid must be wiped up or allowed
to air dry.
CLEANING / DEODORIZING DIRECTIONS: Add 1 1/4
ounce per gallon of water (or equivalent use dilution) to
clean and deodorize windows, mirrors and other surfac-
es. Apply solution with a brush, mop, cloth, sponge or
mechanical spray device so as to wet all surfaces thor-
oughly. For sprayer applications, use a coarse spray
device. Spray 6-8 inches from surface. Rub with sponge
or cloth. Do not breathe spray. Allow surface to air dry or
wipe up excess liquid.
FOR DEODORIZING GARBAGE CANS, GARBAGE
TRUCKS, INDUSTRIAL WASTE RECEPTACLES AND
GARBAGE HANDLING EQUIPMENT: It is especially
important to preclean for the product to perform properly.
Use 1 1/4 ounce per gallon (or equivalent use dilution) of
this product or other suitable detergent system for pre-
cleaning step. Then, apply a wetting concentration of 6
ounces of this product per gallon of water (or equivalent
use dilution).
FOR DEODORIZING SEPTIC STORAGE TANKS: Pre-
clean heavily soiled areas. When tanks are empty, pour
1 1/4 oz. per gallon of water (or equivalent use dilution)
into septic storage tank on recreational vehicles,
campers and boats to control odors. As tank fills with
sewage and the vehicle is moving, this solution will mix
and provide an adequate deodorizing solution for this
use. This product is to be used on gray and black water
tanks only. Check with local, state, or federal authorities
before disposing of sewage in accordance to federal,
state and local regulations for waste disposal.
AIR FRESHENER / AUTOMOTIVE USES: Effective on
smoking and food odors (garlic, fish, onions, etc.), auto-
mobile odors from tobacco, musty carpet smell, and
beverage smells will be eliminated. A solution of 1 1/4
oz. per gallon of water (or equivalent use dilution) will
effectively neutralize odors. Spray or apply onto seats,
carpets, headliner and ashtray or into trunk and all vents
to eliminate odors from tobacco, food, beverage spills
and musty carpet. For sprayer applications, use a coarse
spray device. Allow to air dry.