Product Literature

ManualsBrandsUnbranded ManualsLandscape DripDL2000™ Series Subsurface Dripline

SPECIFICATIONS

Operational

• Design flexibility for narrow, odd-shaped landscape areas

• Precise watering puts water where it’s needed; avoids water

marks on expensive hardscapes, glass or signage

• Distinctive red strip on tubing signifies DL2000 with ROOTGUARD

Warranty

• Against Root Intrusion: Seven years

• Hose: Five years pro-rated

DL2000 MODEL LIST

Model Description

5/8” DL 2000 PC DRIPLINE WITH ROOTGUARD

RGP-212-01 0.5 gph, 12” emitter spacing, 100 ft. coil

RGP-412-01 1.0 gph, 12” emitter spacing, 100 ft. coil

RGP-218-01 0.5 gph, 18” emitter spacing, 100 ft. coil

RGP-418 -01 1.0 gph, 18” emitter spacing, 100 ft. coil

RGP-212-05 0.5 gph, 12” emitter spacing, 500 ft. coil

RGP-412-05 1.0 gph, 12” emitter spacing, 500 ft. coil

RGP-218-05 0.5 gph, 18” emitter spacing, 500 ft. coil

RGP-418 -05 1.0 gph, 18” emitter spacing, 500 ft. coil

RGP-212-10 0.5 gph, 12” emitter spacing, 1000 ft. coil

RGP-412-10 1.0 gph, 12” emitter spacing, 1000 ft. coil

RGP-218-10 0.5 gph, 18” emitter spacing, 1000 ft. coil

RGP-418 -10 1.0 gph, 18” emitter spacing, 1000 ft. coil

5/8” DL2000 PC PURPLE DRIPLINE WITH ROOTGUARD

RGP-212-05- E 0.5 gph, 12” emitter spacing, 500 ft. coil

RGP-412-05-E 1.0 gph, 12” emitter spacing, 500 ft. coil

RGP-218-05-E 0.5 gph, 18” emitter spacing, 500 ft. coil

RGP-418-05-E 1.0 gph, 18” emitter spacing, 500 ft. coil

Specifying Information—DL2000

RGP X-XX-XX-E

Emitter Flow

Emitter

Spacing

Coil Length Optional

X XX XX E

2—.53 gph

4—1.0 gph

12—12”

18—18”

01—100’ 05—500’

10—1000’

E—Purple Tubing for

Non-potable Water

Example: A 500’ coil of Pressure-compensating Dripline with rootguard,

12” emitter spacing and 0.5 gph, would be specified as: RGP-212-05

Note: Specify/use Loc-Eze Fittings or .710 Compression Fittings.

Air/Vacuum

Relief Valve

(Part No.

T-YD–500 –34)

Water Source

Filter

(Part Nos.

T-ALFD75150–L)

Control Valve

Pressure Regulator

(Part Nos. T-PMR15–LF,

T-PMR25–LF, T-PMR40–MF,

T-PMR25–HF & T-PMR25–MF)

Also Available as a

Drip Zone Valve Kit.

Emitter

Tee

(Part No. T-FTT16)

Elbow

(Part No.

T-FEE16)

Flush Valve

(Part No. T-FCH–H)

Dripline

Other fittings available:

• Coupling (Part No. T-FCC16)

• Adapter (Part No. T-FAM16)

• Compression Adapter (Part No. T-CA-710)

5/8” OD

INLET PRESSURE VS.

MAXIMUM LENGTH OF RUN IN FEET

Part No.

Flow Rate

(gph)

Emitter

Spacing

15 psi 25 psi 30 psi 40 psi

RGP-212 .53 12” 250’ 360’ 400’ 460’

RGP-218 .53 18” 350’ 515’ 565’ 650’

RGP-412 1.0 12” 160’ 240’ 260’ 300’

RGP-418 1.0 18” 240’ 340’ 375’ 430’

DL2000 PERFORMANCE TABLE

Flow Rate .53/1.00 gph

Inside Diameter 0.620”

Outside Diameter 0.710”

Wall 0.045”

Operating pressure (P) 15–60 psi

Minimum filtration requirement 120 Mesh

Hazen-Williams C factor 140

Barb loss factor (Kd) .98

PRECIPITATION RATE FOR EVENLY SPACED

LATERALS AND EMITTERS

Precipitation Rate for Drip Laterals (inches/hour)

Emitter

Flow

(gph)

Emitter

Spacing

(in.)

Spacing Between Drip Laterals

6 in. 12 in. 18 in. 24 in. 30 in. 36 in.

0.53 12 1.7 0.85 0.57 0.43 0.34 0.28

0.53 18 1.13 0.57 0.38 0.28 0.23 0.19

1.00 12 3.27 1.64 1.09 0.82 0.65 0.55

1.00 18 2.18 1.09 0.73 0.55 0.44 0.36

Precipitation Rate (in./hr.) =

Precipitation Rate Formula:

231.1 x Emitter Flow (gph)

Lateral Spacing (in.) x Emitter Spacing (in.)

Note: This formula applies to evenly spaced drip irrigation laterals and emitters.

www.toro.com

The Toro Company • Irrigation Division • 5825 Jasmine St.

Riverside, CA • 92504 • 877-345-8676

Speciﬁcations subject to change without notice.

For more information, contact your local Toro distributor.