Manual

NOTES:

Landscape Dripline Design _____________________________________________________________

■ Installation Procedures

Installation Steps

■ Assemble and install lter, remote control valve and pressure-

regulating valve assembly(ies) according to detail numbers

1 and 2, p. 23.

■ Assemble and install supply header(s) according to detail numbers

3, 5, 4 and 6, p. 24-25. Tape or plug all open connections to

prevent debris contamination.

■ Assemble and install exhaust header(s) in accordance with detail

numbers 7 and 8, p. 26. Tape or plug all open connections to

prevent debris contamination.

■ Install dripline laterals. Tape or plug all open ends while installing

the dripline to prevent debris contamination.

■ Install air vacuum relief valve(s) at the highest point(s) of the

zone(s) according to detail numbers 9, 10, 11 and 12, p. 27-28.

(only required on subsurface installations)

■ Thoroughly ush supply header(s) and connect dripline laterals

while ushing.

■ Thoroughly ush dripline laterals and connect to exhaust header(s)

or interconnecting laterals while ushing.

■ Thoroughly ush exhaust header(s) and install line ushing valves

according to detail number 13, p. 29.

Thorough ushing of each installation segment is

necessary to ensure that no debris contamination

occurs.