Use and Care Manual

A
2
B
2
C
8
D BOLT(M8*25)
METAL WASHER
CHAIR LEG
CHAIR SEAT
CHAIR BACK
LOCK WASHER
HEX WRENCH
20
E
20
F
20
G
1
PARTS LIST
EFD
A
B
E F D
Step 1
Place the chair back (A) on a flat, soft surface. Attach the chair seat (B) to the chair back (A)
by using the bolts (D), the lock washers (F) and the metal washers (E).
Note: Do not fully tighten the bolts.
Step 2
F
D
E
C
E F D
Attach the chair legs (C) to the chair seat (B) with the bolts (D), the lock washers (F) and
the metal washers (E). Tight all the bolts (D) with the hex wrench (G).
Step 3
Carefully turn the chair over and set it down on its legs. The chair is ready for your
enjoyment.
IMPORTANT!! PLEASE READ ENTIRE
INSTRUCTION SHEET BEFORE ASSEMBLY!!
Goldie 3-Piece Garden Bistro Set-Chair
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface. If you are missing any parts or
are unsure how to proceed with assembly, please call the customer service center
immediately at 844-836-4055 (Monday-Friday, 9: 00 am-5:00pm CST) or e-mail:
[e-mail]
Do not attempt to assemble the product if any parts are missing or damaged .
Step 1
Step 2