Certificate
12-28,
str/sol
3.5
(M2.5)
5.0
(M3.0)
2(105),
4
Note
A
D
2EDGKQ-5.0*ddd, for use with pin header series DG332J 14-28,
str/sol
Cu 2 4.5 300 10 B 2(120),
4
Note A - These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single
circuit of the terminal block does not exceed 15 A at 51-150 V, 10 A at 151-300 V, or 5 A at 301-600 V, or the maximum ampere rating,
whichever is less.
# - Terminal Block Headers.
*a = DG332J, followed by 5.0, followed by 01-99, followed by P, followed by two numbers or one number and one letter, followed by 00-
9999999999, followed by A(H), B(H)...Z(H).
*b = Followed by K or KM for use with pin header series 2EDGV, 2EDGVC, 2EDGVM, 2EDGR, 2EDGRC, 2EDGRM, followed by 5.0, 5.08, 7.50, or
7.62, followed by 01-99, followed by P, may be followed by two digit numbers or one number and one letter, followed by 00-9999999999,
followed by A(H), B(H)...Z(H).
*b1 = Followed by KT or KTM, for use with pin header series 2EDGV, 2EDGVC, 2EDGVM, 2EDGR, 2EDGRC, 2EDGRM, followed by -5.0, -5.08,
-7.50, or -7.62, followed by 01-99, followed by P, may be followed by two digit numbers or one number and one letter, followed by 00-
9999999999, followed by A(H), B(H)...Z(H)
*c = Followed by K, may be followed by A, B, M, AM or BM followed by -3.50, -3.81 or -5.08, followed by 1 or 2-digit number, followed by P, may
be followed by two numbers or one number and one letter, followed by 00-9999999999, followed by A(H), B(H)...Z(H).with headers 15EDGRC,
15EDGRM, 15EDGVC, 15EDGVM, followed by -3.50, -3.81 or -5.08, followed by 1 or 2-digit number, followed by P, may be followed by two
numbers or one number and one letter,followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*d = Followed by 5.0, 5.08, 7.50 or 7.62, followed by one or two digit number, followed by P, may be followed by two numbers or one number
and one letter, followed by 00-999, followed by A(H), B(H), Z(H).
*d(1) = Followed by 5.0, 5.08, 7.5 or 7.62, followed by one or two digit number, followed by P, maybe followed by two numbers or one number
and one letter, followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*e = Followed by -6.35 or -7.62 or -9.52, followed by a one or two digit number, followed by P, maybe followed by two numbers or one number
and one letter, followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*e(1) = Followed by one or two digit number , followed by P, maybe followed by two numbers or one number and one letter followed by 00-
9999999999, followed by A(H), B(H)...Z(H).
*f = (1) 20A max for factory wiring only; (2) 30A max for factory-wiring only; (3) 35A max for factory wiring only.
*f(1) = Followed by one or two digit number, followed by P, maybe followed by two digit numbers or one number and one letter, followed by 00-
9999999999, followed by A(H), B(H)...Z(H).
*g = 76A max. for factory-wiring only, followed by one or ten digit number, followed by P, followed by 00-999, followed by A(H), B(H)...Z(H).
*h = (1) 12a for factory wiring only, (2) 8A for factory wiring only, followed by one or ten digit number, followed by P, followed by 00-999,
followed by A(H), B(H)...Z(H).
*i - (1) = 25A max. for factory wiring only, followed by one or ten digit number, followed by P, followed by 00-999, followed by A(H), B(H)...Z
(H).
*j - (1) = 16A max for factory wiring only, followed by one or two digit number, followed by P, may be followed by two numbers or one number
and one letter, followed by 00-999, followed by A(H), B(H),..., Z(H).
*k. = Followed by RH, RHM, RT, RTC, RTM, VH, VHM, VT, VTC, VTM, may be followed by 5.0, 5.08, may be followed by one or two-digit number,
followed by P, followed by 00-999, followed by A(H), B(H)...Z(H).
*l = RH, RHM, VH, or VHM, may be followed by 3.50 or 3.81, may be followed by one or two-digit number, followed by P, followed by 00-999,
followed by A(H), B(H)...Z(H).
*m - Followed by -5.0 or -7.62, followed by one or two digit number, followed by P, may be followed by two numbers or one number and one
letter, followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*n - Followed by 5.0, 5.08, 7.50, or 7.62, followed by 01-99, followed by P, may be followed by two numbers or one number and o
ne letter,
followed by 00-999, followed by A(H), B(H)...Z(H).
*n1 - Followed by -5.0 or -7.5, followed by one or two digit number, followed by P, may be followed by two numbers or one number and one
letter, followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*o - Followed by 3.81, followed by one or two digit number, followed by P, may be followed by two numbers or one number and one letter,
followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*p - Followed by 7.5, followed by one or two digit number, followed by P, may be followed by two numbers or one number and one letter,
followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*q - Followed by 2.54, followed by one or two digit number, followed by P, followed by 00-999, followed by A(H), B(H)...Z(H).
*r - Followed by V or R, followed by -5.08 or -7.62 or -10.16, followed by one or two digit number, followed by P, followed by 00-999, followed
by A(H), B(H)...Z(H).
*s - Followed by 2.5, followed by one or two digit number, followed by P, followed by 00-999, followed by A(H), B(H)...Z(H).
*t - Followed by 5.0, 5.08, 7.5, 7.62, followed by one or two digit number, followed by P, followed by 00-999, followed by A(H), B(H)...Z(H).
*t1 - Followed by 5.0, 5.08, 7.5, 7.62, followed by one or ten digit number, followed by P, may be followed by two numbers or one number and
one letter,followed by 00-9999999999, followed by A(H), B(H)...Z(H).
*t2 - Followed by -5.0, -5.08, -7.5, -7.62.
*u - Followed by 5.0, 5.08, 7.50, or 7.62, followed by one or two digit number, followed by P, may be followed by two numbers or one number
and one letter, followed by 00-999, followed by A(H), B(H),..., Z(H).
Page 1
5
of 1
7
XCFR2.E228872 - Terminal Blocks - Component
22.01.201
6
htt
p
://database.ul.com/c
gi
-
b
in/XYV/tem
p
late/LISEXT/1FRAME/show
p
a
g
e.html?na
m
...