4092239 Victoria Metal Bed Queen Bronze Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. K.W.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34409223900 3
Parts A Replacement Parts, Visit www.dhpfurniture.com/eng/support-home B A1 C D All in 1 big box! S There are inner box(es) that include components required to complete this assembly. Headboard T938640 Post 01 T938600 Post 02 T938610 Post 03 T938620 Post 04 T938630 Ball T918500 X2 X1 X1 X1 X1 X4 S H G F E Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 3 2 4 Hardware Pack 5 Hardware Pack #: T4092229-00 1/4" X 7/8" x20 1/4" X 11/16" x4 5/16" X 3/4" x16 1/4" x4 1/4" X 1 9/16" x4 6 7 8 1/4" x8 Hardware Note: 4mm x1 X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Step 1 Insert (A1) into (A) & (B) with BOLTS 2 and CURVED WASHER 6. Insert (A1) into (C) & (D) with BOLTS 2 and CURVED WASHER 6. A1 B A1 B Correct: Part (A1) peretrating through Part (A)/(B)/(C)/(D). Wrong: Part (A1) NOT peretrating through Part (A)/(B)/(C)/(D).
Step 2 Insert (F) X2 into (E) x2 with BOLTS 4.
Step 3 2 2 3.1 Attach (H) x2 to sub-assembly (E/F) x2 from STEP 2 with BOLTS 2. 3.2 Attach (G) to (E) X2 with BOLTS 2. G H E F 3.1 3.
Step 4 L 2 This bed offers you 2 options for the height of the bed foundation.From STEP 4 to STEP 9 will show you how to assemble the bed foundation in the lower position. If you intend to assemble the bed foundation in the higher position, please start from Step 10. Attach (L) x 2 to (G) with BOLT 2.
Step 5 Attach (E) & (F) to (A), (B) , (C) & (D) with BOLTS 3 Wide side of the slot should be facing up ! 3 A F B A E F C F 3 E D x16 B34409223900 10
Step 6 1 6.1 Insert one end of both (I) into the slot on (G) as illustrated. 6.2 Attach the other end of both (I) to (H) with BOLTS 1 and NUTS 5. I H I G I 5 6.1 6.
Step 7 1 Attach (L) & (K) to (G) with BOLTS 1 and NUTS 5.
Step 8 Y E 1 E 2 8.1 Insert (O1) into (E & F) as illustrated: 8.2 Lock (O1) into place with (Y). 3 O1 O1 8.2 8.
Step 9 Attach (S) x4 to (A), (B), (C) & (D).
Step 10 M From Step 10 to Step 15 will show you how to assemble the bed foundation in the lower position. Attach (M) X 2 to (G) with BOLTS 2.
Step 11 Wide side of the slot should be facing up ! Attach (E) & (F) to (A), (B), (C) & (D) with BOLTS 3.
Step 12 1 12.1 Insert one end of both (I) into the slot on (G) as illustrated. 12.2 Attach the other end of both (I) to (H) with BOLTS 1 and NUTS 5. I I I G H 5 12.2 12.
1 Step 13 1 K G 5 Attach (M) & (K) to (G) with BOLTS 1 and NUTS 5.
Step 14 E 1 O1 E 2 14.1 Insert (O1) into (E & F) as illustrated: 14.2 Lock (O1) into place with (Y). 3 O1 O1 14.1 14.
Step 15 Attach (S) x4 to (A), (B), (C) & (D).
Weight Limit: 500 Lb / 227 Kg Helpful Hints Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old. Prohibit jumping and horseplay on this bed.
4092239 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Victoria Metal Bed Queen Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Bronce Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 2 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Una la parte (A1) con (A) & (B) con TORNILLOS 4 y ARANDELA CURVA 6. Una la parte (A1) con (C) & (D) con TORNILLOS 4 y ARANDELA CURVA 6. Paso 2 Insertar (F) X 2 dentro de (E) X 2 con TORNILLOS 4. Paso 3 3.1 Una la parte (H) X 2 con subconjunto (E & F) x 2 del Paso 2 con TORNILLOS 2. 3.2 Una la parte (G) con (E) X 2 con TORNILLOS 2. Paso 4 Esta cama le ofrece 2 opciones para la altura . De Paso 4 al Paso 9 se mostrar c mo montar la base de la cama en la posici n m s baja.
4092239 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Victoria Metal Bed Queen Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 2 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Ins rer (A1) dans (A) et (B) avec BOULONS 4 et RONDELLE COURBE 6. Ins rer (A1) dans (C) et (D) avec BOULONS 4 et RONDELLE COURBE 6. tape 2 Ins rer (F) X 2 dans (E) X 2 avec BOULONS 4. tape 3 3.1 Attacher (H) X 2 au sous-ensemble (E & F) x 2 de l' tape 2 avec BOULONS 2. 3.2 Attacher (G) (E) X 2 avec BOULONS 2. tape 4 Ce lit vous offre 2 options pour la hauteur de lit. De tape 4 tape 9 on va vous montrer comment assembler le lit dans la position plus basse.
