Instructions / Assembly

CASUAL DINING CHAIR

& CASUAL DINING CHAIR W/ARMS

INSTRUCTIONS

• CHAIR BACK/BACK LEGS

• CHAIR SEAT

• LEFT FRONT LEG

• RIGHT FRONT LEG

• FRONT SPREADER BAR

• LOWER FRAME

• RUBBER MALLET

• PHILLIPS HEAD SCREWDRIVER

• DRILL

DC1: Hardware Pack Weight: 3.5 oz. DCA1: Hardware Pack Weight: 6.5 oz.

Only included in Casual Dining Chair w/Arms hardware pack.

(2) BARREL NUTS*

(2) 1.5” BARREL BOLTS*

(4) 2” SCREWS

(4) 3” SCREWS

(6) 4”

SCREWS

(1) ALLEN WRENCH*

(1) SQUARE-HEAD BIT

HARDWARE PACK

CHAIR PARTS

SUGGESTED TOOLS

STEP 1. Attach front spreader bar to left and right front legs.

ASSEMBLY

• LEFT CHAIR ARM

• RIGHT CHAIR ARM

LEFT

FRONT

LEG

RIGHT

FRONT

LEG

FRONT SPREADER BAR

PAGE 1
CASUAL DINING CHAIR & CASUAL DINING CHAIR W/ARMS HARDWARE PACK DC1: Hardware Pack Weight: 3.5 oz. DCA1: Hardware Pack Weight: 6.5 oz. I N ST R U C T I O N S (4) 2” SCREWS (4) 3” SCREWS (6) 4” SCREWS (2) 1.5” BARREL BOLTS* (2) BARREL NUTS* (1) ALLEN WRENCH* ASSEMBLY (1) SQUARE-HEAD BIT STEP 1. Attach front spreader bar to left and right front legs. *Only included in Casual Dining Chair w/Arms hardware pack.
PAGE 2
ASSEMBLY STEP 2. Use (4) 4” screws to attach front chair legs, chair seat and chair back. STEP 3. Use (4) 3” screws to attach front chair legs, chair seat and chair back. CHAIR SEAT CHAIR BACK/ BACK LEGS 4” SCREW STEP 4. Use (4) 2” screws to attach lower frame to front and back chair legs. The screws on the front of the lower frame should be offset towards the top side. 3” SCREW STEP 5. Use (2) 1.5” barrel bolts and (2) barrel nuts to attach chair arms to chair back. 1.