Instructions / Assembly
WIRELESS UNIVERSAL VIDEO DOORBELL CHIME
THANK YOU FOR YOUR PURCHASE. YOU HOLD IN YOUR HANDS AN EXCLUSIVE PATENT PENDING
INNOVATION FROM OHMKAT! YOUR OHMKAT WIRELESS UNIVERSAL CHIME WILL WORK WITH ANY
OHMKAT POWER SUPPLY (OHMKAT ONLY) AND ITS CORRESPONDING VIDEO DOORBELL. ONCE
INSTALLED, CHIME WORKS IMMEDIATELY. IF YOU ARE HAVING ANY ISSUE, PLEASE CONTACT US. WE
ARE USA BASED. ALL OHMKAT PRODUCTS COME WITH A LIFETIME REPLACEMENT WARRANTY.
STEP 1: Unplug your OhmKat and open the split connection.
STEP 2: Plug in the transmitter as in the diagram above.
STEP 3: Plug the chime into an outlet within 50 feet of the
transmitter. Plug back in the OhmKat power supply.
STEP 4: If you have a Ring Pro, please make sure to click
settings in the App, and then Doorbell Kit Settings, and then
select Mechanical. Be sure to Save. For any other video
doorbell, if you had set a no-chime setting in its App, then
you will have to set it to Chime Present. Please remember to
check this if you face issues in Step 5. If all is set correctly,
chime will sound when video doorbell is pressed.
STEP 5: Once your video doorbell is powered up, ring it.
If the chime rings, you are all set! Now wait for 30 seconds
and try again. If all sounds good, great. If the chime does
not ring, please move it closer to the transmitter and try
again. There may be some local interference. You can then
set the chime volume and tune to your preferences using the
buttons on the side. There are 32 different tune options.
For any questions, please call (732-876-3034)
OR email(service@ohmkat.com)
WE LOVE HEARING FROM YOU!
DING DONG!
Your chime uses RF signal and does not need
internet or WIFI. It is designed for long lasting
trouble-free service.