Instructions / Assembly

ManualsBrandsUnbranded ManualsOutdoors43.3 in. W Natural Circle Solid Wood Circular Outdoor Wooden Picnic Tables with 3 Benches for Backyard

WOODEN PICNIC TABLE ASSEMBLY INSTRUCTION

A 1pc

B 1pc

F 4pcs

C 4pcs

G 8pcs

D 2pcs

E 2pcs

H 4pcs

I 3.5x25mm 6pcs

J 3.5x45mm 4pcs

K 6x50mm 8pcs

L 6x70mm 24pcs

M 8x100mm 8pcs

N M8 8pcs

O M6 24pcs

P 10# 1pc Q 14# 1pc

Step 1

I 6pcs

Repeat this step on each hinge

Each hinge use 3 screws

Scew I need to be 100% tighten

Summary of content (4 pages)

PAGE 1
WOODEN PICNIC TABLE ASSEMBLY INSTRUCTION C 4pcs B 1pc A 1pc E 2pcs D 2pcs J 3.5x45mm 4pcs N M8 8pcs H 4pcs G 8pcs F 4pcs K 6x50mm 8pcs O M6 24pcs P 10# 1pc L 6x70mm 24pcs I 3.
PAGE 2
Step 2 L 8pcs O 8pcs C C J O O C L L C L Leg on the right side of the drag wood Symmetrical installation at both ends Bolts L should be 50% tighten O cannot be put on until L 100% tighten L Assmeble legs according to above position Leg on the right side of the drag wood Symmetrical installation at both ends Bolts L should be 50% tighten O cannot be put on until L 100% tighten Step 3 D D Turn over one D 180 degree to ensure they are matched perfect matched Then repeat this step on E, to make
PAGE 3
Step 4 M 2pcs N 4pcs N DD M N C is between two D Bolts M tighten 30% Don’t put on N until M is 100% tighten Both ends need to assemble Step 5 E E Repeat last step to assemble E Step 6 M 2pcs N 4pcs N C is between two E Bolts M tighten 30% M N Don’t put on N until M is 100% tighten Both ends need to assemble
PAGE 4
Step 7 L 16pcs O 16pcs G G O O Bolts L tighten 50% L Repeat this step on the other three benches L O cannot be put on until L 100% tighten F Step 8 K 8pcs H K Bolts K tighten 30% Repeat this step on the other three benches Step 9 M 4pcs J 4pcs Bolts M tighten 100% H and C matched perfectly J Screw J need to be tighted 100% Repeat this step on the other three benches M Step 10 Put on N at each end Repeat last step until each bench is assembled correctly then TIGHTEN EACH BOLTS AND SCREWS TO BE 1