Instructions / Assembly

Assembly
1
Adhering the sink
□
□
Adjusting the leg levelers (optional)
CAUTION: Two people are needed to safely tilt the
vanity and access the leg levelers.
□ If the oor is uneven, causing the vanity (A) to wobble,
determine which leg or legs need to be adjusted in height.
Carefully tilt the vanity (A) either backwards forwards to
access the leg leveler.
Turn the leveler clockwise to make the leg longer, or
counterclockwise to make it shorter.
Repeat as needed with the other legs until the vanity (A)
stands solidly on the oor.
□
4
□
□
□
□
Wipe off the top edges of the vanity top cut-out (A) that will
be in contact with the sink (B) using a clean rag.
Apply a layer of silicone along the edge.
Align the sink (B) with the cut-out on the vanity top (A).
Slowly lower the sink (B) onto the vanity (A).
Wipe away any excess silicone that may have seeped out.
□
1
3
Installing the shelves
□
□
A
□
C
D
C
Insert 4 shelf pins (AA) into the 4 pre-drilled holes in the upper
half of the open space in the vanity (A) at the desired height.
Slide an exterior shelf (C) into the vanity (A) above the pins (AA).
Repeat with 4 more shelf pins (AA) and exterior shelf (C) in
the lower half at the desired height.
Repeat with the remaining 4 shelf pins (AA) and interior
shelf (D) inside the cabinet (A).
□
2
A
B
A
AA