Installation Guide

IMPORTANT SAFETY INFORMATION:

CAUTION: This luminaire must be wired in accordance with the National Electric Code and applicable local codes and

ordinances. Proper grounding is required for safety.

CAUTION: Installation and servicing of this luminaire should be performed by qualied personnel only.

CAUTION: Do not use this product for other than intended use. To prevent early product failure, luminaire should only be

used in operating environments ranging from -40°C (-40°F) to 40°C (104°F).

Cleaning and Maintenance:

Caution: Do not clean or maintain while the luminaire is energized. Check that the luminaire temperature is cool enough

to touch. Periodically check and remove any accumulated dirt or debris from the lens and around luminaire.

1) Clean lens with non-abrasive glass cleaning solution.

2) Do not open the luminaire to clean the LEDs. Do not touch the LEDs.

Replacement Parts:

Contact your sales representative for replacement part availability or contact Halco Customer Care at 800.677.3334.

Warranty Information:

This product is warranted for 5 years from the date of purchase.

If this product does not perform to the specications supplied on this package, send an email or write to the address

below for product return and replacement. This replacement is the sole remedy available.

Liability for incidental or consequential damage is expressly excluded.

Visit www.halcolighting.com for full warranty details and compatibility information.