Installation Guide
26/12/2023
Step 2b: If seaming is required – IMPORTANT
Cut in the same direction as the length of the rug. Example: the carpet is 12ft
Wide and you ordered 4ft Length – you will cut with/parallel to the 4ft direction.
DO NOT cut any seams parallel to the natural 12ft Width of the rug. Refer to
diagram below.
IMPORTANT!!! For PATTERNED Rugs: cut seams where the pattern will
match when cuts are seamed together.
***This step is only required if seaming together 2 cuts of rug***
12ft Roll Width – DO NOT CUT THIS DIRECTION FOR SEAMING
Example: 4ft Length
– CUT ONLY IN
THIS DIRECTION FOR SEAMING
Wall-to-Wall Installation Instructions (Indoor)
Sisal-Weave Roll Bar Carpeting