Installation Guide

1
Stinger CLASSIC
Install Instructions
Key Less, Live More!™
Teamxiq.com
Checklist before Installation
❏ I have an Electric Golf Cart
❏ The maximum current through the ignition switch does not exceed
2 Amps when the Golf Cart and all accessories are turned on.
❏ Select your Battery Configuration:
A) Four 12 Volt
Batteries
B) Six 8 Volt
Batteries
C) Eight 6 Volt
Batteries
If A) connect to a single 12 Volt Battery.
If B) connect to TWO 8 Volt Batteries in Series to create 16 Volts.
If C) connect to TWO 6 Volt Batteries in Series to create 12 Volts.
2
Installation Instructions
1. Lift seat to access golf cart batteries
2. Connect the battery cable to the
battery/batteries (depending on your
battery configuration) Secure fuse with
provided zip ties to ensure a good
connection
3. Route the wire from battery to the
Dashboard and secure with zip ties.
4. Remove the dashboard
5. Remove the ignition switch
6. Remove connectors from switch
7. Mount the Stinger to the dashboard. (A secure lock nut is provided, if necessary use provided spacer)
8. Connect the Stinger. With provided zip
ties, secure all wires tightly to the frame
and battery compartment. After
installation, test golf cart with Stinger
turned on and off