SDS

DAK Americas LLC
Safety Data Sheet
SDS Number: DK0002 Page 3 of 7
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATABILITIES:
Store cartons and bales in accord with good material handling practices.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
Carbon
Black
Titanium
Dioxide
Particles Not
Otherwise Specified
Particulates Not
Otherwise Regulated
(PNOR)
Oil Mist
+
,
mineral
PEL
(OSHA):
15 mg/m
3
Total dust
-
15 mg/m
3
Total dust
5 mg/m
3
Respirable
fraction
5 mg/m
3
TLV
(ACGIH):
10 mg/m
3
3 mg/m
3
Respirable
particles
10 mg/m
3
Inhalable
particles
-
-
*All exposure limits presented are 8-hour time weighted average (TWA) limits.
+
Product is coated with lubricants that depending on processing could become airborne.
APPROPRIATE ENGINEERING CONTROLS:
It is recommended that exposure to any inhalable material or hazardous decomposition
products be minimized by the use of adequate ventilation, such as local exhaust.
INDIVIDUAL PROTECTION MEASURES / PERSONAL PROTECTIVE EQUIPMENT:
EYE/FACE PROTECTION: Safety glasses.
RESPIRATORY PROTECTION: Respirators are not needed for normal use. Where airborne
concentrations are expected to exceed exposure limits, a NIOSH approved respirator
should be selected based on the form and concentration of the contaminant in air and in
accordance with the OSHA Respiratory Protection Standard (29 CFR 1910.134).
PROTECTIVE CLOTHING: Special protective clothing is not needed for normal use. Gloves
are recommended as good industrial practice.
RECOMMENDED DECONTAMINATION FACILTIES: Eyewash station, washing facilities.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Fiber, clear and colorless, white
if product contains TiO
2
, black
if product contains carbon
black
Vapor Pressure:
Not Applicable
Odor:
Odorless
Vapor Density:
Not Applicable
Odor Threshold:
No data available
Specific Gravity:
>1
pH:
Not Applicable
Solubility in Water:
Insoluble
Melting Point:
250 300 °C
Partition coefficient
(n-octanol/water):
No data available
Initial Boiling Point
and Boiling Range:
No data available
Auto-Ignition
Temperature:
No data available
Flash Point:
Not applicable, combustible
solid
Decomposition
Temperature:
150 - 250 °C
Evaporation Rate:
No data available
Viscosity:
No data available
Flammability:
No data available
% Volatiles:
3% - Only finish
will volatize below
the melting point
Flammability
Limits
(Upper/Lower):
No data available